Knocking?

Author
Discussion

neil.b

Original Poster:

6,546 posts

248 months

Friday 9th January 2004
quotequote all
Noticed a knocking noise at low speeds, the frequency in sync with the rolling speed of the car (easiest to hear it by dipping the clutch and rolling). Seems to be coming from one of the back wheels. Wierd thing is, if I apply the brake (even a tiny bit of pressure), it disappears.

Anyone?

19560

12,722 posts

259 months

Friday 9th January 2004
quotequote all
Something like a twig caught in the braking system (next to the disc?)

matt101

299 posts

260 months

Friday 9th January 2004
quotequote all
I reckon its your rear brake pads tapping against the disc/ caliper. There can be a bit of play allowing the pad to move around in the caliper. As soon as you touch the brakes the play will be taken up hence the noise disappearing.

Quite common on Cerbs. Not sure about others

>> Edited by matt101 on Friday 9th January 14:12

>> Edited by matt101 on Friday 9th January 14:13

neil.b

Original Poster:

6,546 posts

248 months

Friday 9th January 2004
quotequote all
matt101 said:
I reckon its your rear brake pads tapping against the disc/ caliper. There can be a bit of play allowing the pad to move around in the caliper. As soon as you touch the brakes the play will be taken up hence the noise disappearing.

Quite common on Cerbs. Not sure about others

>> Edited by matt101 on Friday 9th January 14:12

>> Edited by matt101 on Friday 9th January 14:13


Cheers Matt. Is it a common characteristic or common problem? i.e. should i go and get it checked out?

GI Jnr

1,903 posts

262 months

Friday 9th January 2004
quotequote all
neil.b said:

Cheers Matt. Is it a common characteristic or common problem? i.e. should i go and get it checked out?


Ours did it. It's the brake caliper working loose (IIRC). You should take it back to the dealer to get fixed. I wouldn't drive to either.

Tuan

aromaT

919 posts

246 months

Sunday 11th January 2004
quotequote all
may be the caliper but much more likely to simply be the pads IMHO