logo and clutch question
Discussion
because of "a little job called clutch" my 350i engine is out of the car!!!!
time to make the engine & chassis look new and polish that rockercovers . Somebody know were i can order that TVR logo plate which is on the covers????
an other question is that the springs which are in the new clutch-plate seem to have some room to move, does anyone have an idea if this is normal????? or does it need to have a tight fit???
matthijs
the netherlands
time to make the engine & chassis look new and polish that rockercovers . Somebody know were i can order that TVR logo plate which is on the covers????
an other question is that the springs which are in the new clutch-plate seem to have some room to move, does anyone have an idea if this is normal????? or does it need to have a tight fit???
matthijs
the netherlands
Matthijs:
The springs on the clutch plate act as shock absorbers. They allow the friction plates to move around the centre hub by a small amount to take out harsh operation. It probably doesn't matter if they are slightly loose as long as the hub is not free to rattle around too much! Maybe you have been doing too many Grand Prix starts...
Ian
The springs on the clutch plate act as shock absorbers. They allow the friction plates to move around the centre hub by a small amount to take out harsh operation. It probably doesn't matter if they are slightly loose as long as the hub is not free to rattle around too much! Maybe you have been doing too many Grand Prix starts...
Ian
Gassing Station | Wedges | Top of Page | What's New | My Stuff