error codes

[jonesy]

Hi,

Does anyone have a link to a full list of error codes? My screen has lines on it so I can't read the text but can read the number. I think its just a cold weather warning on startup, error code 12, something about temp 4 deg C??

Thanks,

Graham.

[Zippee]

I can't help with a list but that is correct as a frost warning code.

[shep1001]

jonesy said:

Hi,

Does anyone have a link to a full list of error codes? My screen has lines on it so I can't read the text but can read the number. I think its just a cold weather warning on startup, error code 12, something about temp 4 deg C??

Thanks,

Graham.

Error 12 is the low external temp, not sure what temp it comes on at >5 dec C I think. List of fault/error codes are as follows, not my list I copied it from an article some time ago and saved a copy. I have seen several of them but the list is quite extensive, I guess some will be diagnostic codes that don't flash on the dash?

Warning Codes:

Oil_P_Under_Min =0x01 =1
Oil_P_Over_Max =0x02 =2
Oil_P_Lamp_On =0x03 =3
EFI_MIL_Lamp_On =0x04 =4
Water_T_Over_Max =0x05 =5
Oil_T_Over_Max =0x06 =6
Battery_Over_Max =0x07 =7
Alternator_Lamp_On =0x08 =8
Inertia_Lamp_On =0x09 =9
Battery_Under_Min =0x0a =10
Fuel_L_Under_Min =0x0b =11
Air_T_Under_Min =0x0c =12
Brake_Fluid_Lamp_On =0x0d =13
RH_Door_Lamp_On =0x0e =14
LH_Door_Lamp_On =0x0f =15
Light left on =0x10 =16
No seat belt =0x11 =17
Gear_T_Over_Max =0x12 =18
Diff_T_Over_Max =0x13 =19
Low_Fuel_Pressure =0x14 =20
High_Fuel_Pressure =0x15 =21

Fault Codes:

Water sensor =0x80 =128
Oil temp sensor =0x81 =129
Oil pressure sensor =0x82 =130
Fuel level sensor =0x83 =131
Air temp sensor =0x84 =132
Speedo zero =0x85 =133
Tacho zero =0x86 =134
Heater controls =0x87 =135
Heater flap zero =0x88 =136
Aircon Fault =0x89 =137
Gear_T_Sensor_Fault =0x8a =138
Diff_T_Sensor_Fault =0x8b =139
Fuel_P_Sensor_Fault =0x8c =140
Brake Fluid Sw.fault =0x8d =141

Power supply control =0x90 =144
Display FRAM failed =0x91 =145
Display FRAM corrupt =0x92 =146
Stepper FRAM failed =0x93 =147
Stepper FRAM corrupt =0x94 =148
Time clock failed =0x95 =149
Time clock corrupt =0x96 =150
Inter uP comms failed =0x97 =151
System initiation =0x98 =152
software invalid =0x99 =153
display switches fault =0x9a =154

[jonesy]

perfect, Thanks Shep