Removing door panel......

[moschops_72]

Here you go... here's something to make you all laugh.... and the person who built door panel 1546... chuffin' 'ell !!! 3 bolts holding the doo on??? naahhh.. my bugger had 4 of them, one of them being about 5 inches away from the VERY rear of the door... Was doing my nut in wondering why the chuffin door wouldn't come off... had to half take the door off, then get a 10mm spanner through the door panel, shredding my hand, arm and elbow in the process... took 2 and a half hours to come off, and 30 mins to replace the cigar lighter, put the trim back on and secure the speaker... i even managed to add a light to the cigar lighter too!! bonus.

After all that loss of skin and blood it felt rather good to have completed it mainly on my todd. i took a pic of where the bolts were, no doubt it'll come in handy for others.

I'll post the pics on another day, as i'm knackered!

Hope this helps anyone out there!

Jeff

[ribol]

Four studs on mine too, I hope you lubricated the electric window rack while it was off. I put cloth tape round the inside of the hole, I found it reduced blood loss dramatically

Ivan

[moschops_72]

i KNEW i'd forget that...

Me in Work today...

Don't forget to lubricate window running gear...

Don't forget to lubricate window running gear...

Don't forget to lubricate window running gear...

Don't forget to lubricate window running gear...

DOH!!!!!!!!!!!!!!

:muttleycursemodeon:

Jeff

[shpub]

I do suggest in the bible to use one of those power cable finders to locate how many screws and any additional hidden ones....

[Incorrigible]

When you put it back on, use wing nuts

[shadowninja]

moschops_72 said:

:muttleycursemodeon:

"frzzzawzzzarzzzzwzzz"?

[rottey]

Did you find the dwarf tvr lost in 1998

[TheHobbit]

rottey said:

Did you find the dwarf tvr lost in 1998

Dwarf?

Blimey, soon we'll have a fellowship.....



Cheers,

TheHobbit

>> Edited by TheHobbit on Tuesday 3rd February 19:13

[k4trv]

TheHobbit said:

rottey said: Did you find the dwarf tvr lost in 1998 Dwarf? Blimey, soon we'll have a fellowship..... Cheers, TheHobbit >> Edited by TheHobbit on Tuesday 3rd February 19:13

"Fellowship" ???

Karl, do you mean a "Watership"........sorry couldn't keep a plug in it....!!

Trev

[TheHobbit]

nah, thats rabbits surely?

yeah, I know, don't call you shirley

[moschops_72]

shadowninja said:

moschops_72 said: :muttleycursemodeon: "frzzzawzzzarzzzzwzzz"?

Ed Zachary!!!



Jeff

[ribol]

moschops_72 said:

i KNEW i'd forget that... Me in Work today... Don't forget to lubricate window running gear... Don't forget to lubricate window running gear... Don't forget to lubricate window running gear... Don't forget to lubricate window running gear... DOH!!!!!!!!!!!!!! :muttleycursemodeon: Jeff

Just been out in the old Chim, cannot tell you how fast my windows go up and down

Ivan

[moschops_72]

Thanks for that Ivan... :P

Well, i have a couple of pics, but can't get into fotoango dot com... anyone wanna give me their mail address so they could put them up for the benifit of other PHers out there?

Jeff

[Big Al.]

moschops_72 said:

Thanks for that Ivan... :P Well, i have a couple of pics, but can't get into fotoango dot com... anyone wanna give me their mail address so they could put them up for the benifit of other PHers out there? Jeff

Before your very eyes.





Just noticed! That's a fair ol pair of snipe nose pliers you got there!

(bottom right hand corner)

[hut49]

Remind me not to ask you for directions, Big Al!!

[moschops_72]

That was the small pair Al

It's great having a friend with a garage! 2 Lifts an' all.

Thanks al for that, me and my post-it's with passwords..

Hope This helps anyone else out there...

Jeff