Headlamp trim

[poorpeet]

How do you remove & refit the headlamp trim on an early Chimaera?
On the drivers side mine is not seated against the body properly. It looks like its about to fall off but is solidly fixed if you try to waggle it.
Any ideas?

[tvrbob]

There are two wing nuts at the bottom. Accessible through either the grill or the wheel arch hatch. There's no mechanical fixing at the top. You can either re-seat by angling the trim as you re-tighten the wing nuts or do as most folk do, use a strong exterior silicon bonding paste.

If you do a search on this subject you will find photos to help.