speedo-plates in KM/h are ready !!!!!!!!!
Discussion
it has been a while but the plates are finally ready
the quality is superb
e-mail me at rens914@live.nl for banking details and your adress
ronspeedsix is making a manual to swap the plates. (it's about 1/2 hours of work)
below the short list
i have 26 x gold and 2 silver ones
all gone !
not enough plates to fill the need. Pm me if youre interested in one. if i have enough enthousiasts i'll have a second batch made.
the quality is superb
e-mail me at rens914@live.nl for banking details and your adress
ronspeedsix is making a manual to swap the plates. (it's about 1/2 hours of work)
below the short list
i have 26 x gold and 2 silver ones
all gone !
not enough plates to fill the need. Pm me if youre interested in one. if i have enough enthousiasts i'll have a second batch made.
Edited by rens914 on Thursday 8th April 13:29
SP6 Animal said:
Any thoughts for what's happening with the plates you take off assuming they come off ok i would like one of the MPH ones in gold
nothing muchthey are taped with dubbelside sticky tape
you can cut it off very gently with a stanley blade
the needle is fixed with 1 holding screw
rens
Great job ! From the pics (where are they gone?) these plates look excellent and they are even better than the originals. The originals actually say Kph in the left downside corner, where yours have the nice km/h rading.
That should also be enough of difference to prevent from Smolenski's advocats claiming for any royalties
That should also be enough of difference to prevent from Smolenski's advocats claiming for any royalties
i'm going to wait till end of the month for before i'm going to offer the remaining pieces to the people on the waiting list.
it would be stupid to let these go if you want one
i know how much effort (and money) it took me to produce them.
there wont be a second batch (or i must have at least 25 people/would be to pricey otherwise)
gr rens
it would be stupid to let these go if you want one
i know how much effort (and money) it took me to produce them.
there wont be a second batch (or i must have at least 25 people/would be to pricey otherwise)
gr rens
I changed the plate today. Was some work but the manual was super. I have one small problem. The needle starts/stops with 10 km/u and I'm sure that I did not bent the clip of the zero switch.
What did I wrong? The speedo is working but the speed on the plate is now 10 km/u higher than the digital reading.
What did I wrong? The speedo is working but the speed on the plate is now 10 km/u higher than the digital reading.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff