Free exhaust manifolds- Before I bin them.
Discussion
Just changed my mild steel manifolds for nice new RT Racing St.St. set so before I take the old ones to the tip, big bore type ex Wedge Automotive (RT Racing) which I fitted 9 years ago, does any one want them? The near side is welded at the junction of ports 1 and 3,not nice to look at but no leaks. The offside is preferated where it clamps to the silencer pipe. I would say you would need to weld a band about 2 1/2 inchs wide around the pipe to make good. Both manifolds are of course after 9 years rusty all over but appear sound.
I am located at Bognor Regis, West Sussex and Bury St.Edmunds, Suffolk. As I say they need work to repair but if they are of any use E-mail me back to discuss. If no replies after a week I will tip them.
I am located at Bognor Regis, West Sussex and Bury St.Edmunds, Suffolk. As I say they need work to repair but if they are of any use E-mail me back to discuss. If no replies after a week I will tip them.
Gassing Station | Wedges | Top of Page | What's New | My Stuff