Fuel Filter/ Tyre Pressures
Discussion
Chaps, Am about to change the inline fuel filter on my 1986 350 s2,( the one next to the pump at the rear of car)and was wondering how to go about it considering the thing is under high pressure.I cant seem to find the area where the fuse is for the pump?Any suggestions would be grateful.Finally, what would be suggested tyre pressures front and back for this vehicle?Thanks
It's easy and not pressurised.
Engine off. No nakes flames or electrics too near.
Undo all clips and mounts.
Clamp pipes (gravity pressure only) or have a friend
bend them (double back) remove filter - fit new one.
(do it quick) ..
And remember to observe the flow as it's designed to flow one way !
Engine off. No nakes flames or electrics too near.
Undo all clips and mounts.
Clamp pipes (gravity pressure only) or have a friend
bend them (double back) remove filter - fit new one.
(do it quick) ..
And remember to observe the flow as it's designed to flow one way !
Gassing Station | Wedges | Top of Page | What's New | My Stuff