help quick!

[taff_o]

Can anyone tell me where I can get the 10mm spacers for the AP/Princess brake upgrade? I have just phoned Ralley Design and they only have 8mm. I need them really quick as the old discs are off an new one waiting to go on.
Also does anyone know off what the solenoid for the boot release comes or a part number?

Thanks for any help.

Taff

[AM400]

check this link out

www.pistonheads.com/gassing/topic.asp?t=52616&f=12&h=5&hw=<span%20style=

Andy

[degz]

ebay MAL3752, bought the kit, but bolts are to large, made for landrover conversion, get just the spacers and buy your own bolts. also local motor factor can provide a pad fitting kit for a landi, fits perfect about £2.50

[wedg1e]

Any standard central locking motor should do for the boot release - Maplins used to do one for about a fiver, roughly the same from a scrappy...

Ian

[Taff_o]

Has anyone got a phone number for this [e-mail] or Web address who supplies the spacers, or anyone who does 10mm spacers, I really need them by tomorrow, again thanks for all your help.

Taff

[bluewedge350]

I got mine made up at Peter Lloyd Rallying only a couple of months ago. You need to specifically ask for a one-off to be made, although he only charged me an extra fiver.

www.peterlloydrallying.co.uk

John

[taff_o]

Thanks for everyones help, i've been able to order a set of 10mm spacers and seals from [e-mail] aka Mal, and just in case anyone else needs to speak to him his number is 07710 367394 (he's ok about anyone ringing him on this number) and they were only 25 quid ( which reminds me I've got to post the cheque!).

Taff