headlamp reflectors (round 6" IODE4) - suppliers?
Discussion
Yes - I think they are Cibie/Valeo H180 with Pin Fixing (but this needs confirming) which are officially classed as 7" even though they are really 6+".
My question is - apart from this specialist, were they used on any more common cars who may have supplies?
With the price at £35 (presumably plus VAT+p+p) another option might be re-silvering as I now have 4 unbroken but dull lenses.
My question is - apart from this specialist, were they used on any more common cars who may have supplies?
With the price at £35 (presumably plus VAT+p+p) another option might be re-silvering as I now have 4 unbroken but dull lenses.
One thing I did fix - and you can easily try - is to cure a 1+ volt drop at the bulbs. Initially they were only getting 10.2 volts with battery=12.0v.
I cleaned up the fuse contacts, the 2 relays contacts,
and the multiplugs behind the pods (the worst culprits!)
Result was I gained a volt to get 11.3V, only a .7V drop, not bad with all the connections in the way.
Light output much improved!!!
I cleaned up the fuse contacts, the 2 relays contacts,
and the multiplugs behind the pods (the worst culprits!)
Result was I gained a volt to get 11.3V, only a .7V drop, not bad with all the connections in the way.
Light output much improved!!!
adam quantrill said:
One thing I did fix - and you can easily try - is to cure a 1+ volt drop at the bulbs. Initially they were only getting 10.2 volts with battery=12.0v.
I cleaned up the fuse contacts, the 2 relays contacts,
and the multiplugs behind the pods (the worst culprits!)
Result was I gained a volt to get 11.3V, only a .7V drop, not bad with all the connections in the way.
Light output much improved!!!
Top tip Adam. I bet thats the problem with my 350
Cheers.
Have you seen these on ebay?
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2469998652&category=23009
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=2469998652&category=23009
Gassing Station | Wedges | Top of Page | What's New | My Stuff