Dash out but a few questions?
Discussion
Hi guys managed to remove my dash today, i was sick of looking at the original with veneer missing here there and everywhere.First question unfortunatly i broke one of the tiny led"s [the red one] on the heater, where can i get a replacement.....maplins?. 2nd question how do you remove the radio panel, is it remove the cd player and access nuts/bolts thru this hole? 3rd For anyone who has bought a replacement s/steel dash [leven etc] are these used instead of the steel dash the veneer was stuck too, or are they that thin you use them with the original steel dash behind it?
Few pics... note the position required to undo some of the dash bolts!
Few pics... note the position required to undo some of the dash bolts!
I can't see your pictures, though that's not necessarily your fault because I'm using an iPad.
Link here to show how to remove dash, and bolt position http://www.chimaerapages.com/resources_dash.php though I might be a bit late as you've done yours.
This second link identifies the led's. http://www.chimaerapages.com/resources_partslist.p...
Link here to show how to remove dash, and bolt position http://www.chimaerapages.com/resources_dash.php though I might be a bit late as you've done yours.
This second link identifies the led's. http://www.chimaerapages.com/resources_partslist.p...
TJC46 said:
First question unfortunatly i broke one of the tiny led"s [the red one] on the heater, where can i get a replacement.....maplins?.
Maplins?Nope....
Try this
Need to do this myself WHEN I decide what to replace it with - fancy either another wooden one OR a piano black veneer.....
....more pics please!!!!!!
HTH
Nosh
Edited by Nosh on Tuesday 22 March 21:33
Nosh said:
Maplins?
Nope....
Try this
Need to do this myself WHEN I decide what to replace it with - fancy either another wooden one OR a piano black veneer.....
....more pics please!!!!!!
HTH
Nosh
They're the ones I got - after trying several of the Maplins: I needed the resistor as per the eBay ones in my car.Nope....
Try this
Need to do this myself WHEN I decide what to replace it with - fancy either another wooden one OR a piano black veneer.....
....more pics please!!!!!!
HTH
Nosh
Edited by Nosh on Tuesday 22 March 21:33
R
Nosh said:
Maplins?
Nope....
Try this
Need to do this myself WHEN I decide what to replace it with - fancy either another wooden one OR a piano black veneer.....
....more pics please!!!!!!
HTH
Nosh
Thanks for this link - just got those in. Was worried about all the dash threads I've read where people have been worried about busting those things. Now I won't be. Nope....
Try this
Need to do this myself WHEN I decide what to replace it with - fancy either another wooden one OR a piano black veneer.....
....more pics please!!!!!!
HTH
Nosh
Judging by the contortions needed to get the dash out - I take it that taking the seats out would help? I'm thinking of taking mine out to do this job and to make it easier to clean them once they're out?
TJC46 said:
First question unfortunatly i broke one of the tiny led"s [the red one] on the heater, where can i get a replacement.....maplins?. 2nd question how do you remove the radio panel, is it remove the cd player and access nuts/bolts thru this hole?
I just covered the leds up when I recovered mineWith my radio panel, I removed radio and cage and there were 4 little screws holding it in
Alex
murphster said:
Looks smart - Did you just re-cover the existing dash after peeling the veneer off?
Most of the veneer had lifted, and the mild steel dash panel had surface rust. So i cleaned it all down, removed all the surface rust, painted the back of the dash in primer [so no more rust] and used cellulose thinners on the front,[ to degrease it] then stuck the vinyl straight on to it.Does anyone know where to source the LEDs for the warning lights, indicators etc? Mine are fitted with glue that looks like superglue and getting them out is proving 'challenging' to say the least.
I may have to solder or fit new LEDs.
Chimaerapages parts has an obselete link - maplins say they do not sell the LEDs.
Anyone know where to get them, or (ideally) a set of the mini circuit-boards?
Thanks,
Rich
I may have to solder or fit new LEDs.
Chimaerapages parts has an obselete link - maplins say they do not sell the LEDs.
Anyone know where to get them, or (ideally) a set of the mini circuit-boards?
Thanks,
Rich
Gassing Station | Chimaera | Top of Page | What's New | My Stuff