those Ali race jacks from blatchat
Discussion
did anyone get one ?
mine isn't working and i coudl really use some help
It has a slotted screw on the top plate and also 2 hex head grub screws
i tightened the main screw up
the 2 hex head grub screws i opened
I pushed the piston in and some oil came out of these
but after tightening everything back up (without sucking any air back in) the jack does the same thing ... it will go up but then once it starts to support any weight you just pump it forever and it does not actually go up any further
would appreciate any pointers
mine isn't working and i coudl really use some help
It has a slotted screw on the top plate and also 2 hex head grub screws
i tightened the main screw up
the 2 hex head grub screws i opened
I pushed the piston in and some oil came out of these
but after tightening everything back up (without sucking any air back in) the jack does the same thing ... it will go up but then once it starts to support any weight you just pump it forever and it does not actually go up any further
would appreciate any pointers
Epimetheus said:
jackal said:
so that makes... let me think... 4 bangs and about 8 no bangs
so thats a 50% failure rate
Hmmm . ... it's actually 33% fail rate so thats a 50% failure rate
Imagine 33% of all 5 series BMWs across the world spontaneously combusting !
Edited by jackal on Wednesday 9th December 10:10
Gassing Station | Caterham | Top of Page | What's New | My Stuff