What A Bum Day
Discussion
Hi All.
Well things not gone to plan, should have stayed in bed. Took 2 hours to get diff carrier and diff in, then I found the CV joint bolts were to long, the Cosworth 2 WD CV's are 40 mm wide and use a M10 X 60mm, I have to use a 30mm CV so the drive shafts will fit, did manage to fit the speed sensor and rear hubs. Found some replacement 55 mm 12.9 allen bolts,
Alan
Speed sensor
CV with traction wheel
Boot on to clear fuel lines
Well things not gone to plan, should have stayed in bed. Took 2 hours to get diff carrier and diff in, then I found the CV joint bolts were to long, the Cosworth 2 WD CV's are 40 mm wide and use a M10 X 60mm, I have to use a 30mm CV so the drive shafts will fit, did manage to fit the speed sensor and rear hubs. Found some replacement 55 mm 12.9 allen bolts,
Alan
Speed sensor
CV with traction wheel
Boot on to clear fuel lines
Gassing Station | S Series | Top of Page | What's New | My Stuff