Heated front screens are available - group buy?
Discussion
wires are through the scuttle and connected to a 'Puma' wiring with relays - I need to run positive and install a switch.
no fettling done, it sat quite nicely but the gap varied from near 10mm to near 2mm and due to wanting to drive to Spa on Thursday decided this was a reasonable solution - certainly better than the original st filling the gap.
And that trim looks very retro and in keeping with the age/look of the car - would loved to have had time to look at the choices though.
no fettling done, it sat quite nicely but the gap varied from near 10mm to near 2mm and due to wanting to drive to Spa on Thursday decided this was a reasonable solution - certainly better than the original st filling the gap.
And that trim looks very retro and in keeping with the age/look of the car - would loved to have had time to look at the choices though.
Edited by magpies on Saturday 16th May 22:26
I used these
Ricky Evans Motorsport (glass) Ltd
Unit 11, Roman Park ,Claymore,
Tame Valley Industrial Estate, Tamworth, Staffs.
B77 5DQ
By Email
sales@heatedwindscreen.com
By Phone
+44 (0) 1827 283688
not cheap but they are Pilkington XXX and mine fitted fine.
I have connected the wiring (needs connecting as the screen is being fitted) but not yet energised it
I just ebayed 'Ford heated screen wiring' and purchased a while before the screen turned up. Then just measured where to make the holes through the scuttle. Very fiddly as you have to poke the wiring through from under the dash to connect to the screen then pull back through as the screen is lowered into position.
Gassing Station | S Series | Top of Page | What's New | My Stuff