Centre caps for these wheels??

[gizzardio]

Hi

Does anyone else have these wheels and know what centre caps dims are right? I measured the dia of the wheel centre hole, ordered accordingly 48mm dia and they were a few mm too loose.

Also the clip depth would be good know too if anyone's ordered for these before.

Just dont want to keep ordering and returning trial and error.

Cheers

[gizzardio]

Hi

Its these that I ordered which don't fit.

https://www.amazon.co.uk/dp/B00V0HJXFU/ref=pe_3857...

Its says 48 & 60 mm dia on the cap. That's the weird bit as the dia on the diagram on the webpage shows this as slightly smaller . Either way its too small for the centre hole of the wheel.

[gizzardio]

Ha! yeah true. But I measure 47mm hole on my wheel so when i saw 46.5 i thought fine, 0.5mm will be ok. But then the item arrived with 48mm stamped on it, only to be a lot looser than that..

Anyway, may just silicone em in like you suggest.

[gizzardio]

Hi

Thanks for checking. Weirdest thing. That's what I had ordered apparently, to fit a 48mm hole. But they measure 46mm across that same dimension as you measured.

I might just try siliconing them in now as I don't want to order another set of "48mm" to receive the same again.

If you find where yours are from or know where I can try, like you know the original wheel name and model ref I could try with them.

Cheers