Wash Wipers

[Alan Whitaker]

Hi All
Is there a relay on the S for the wipers or are they fed via the stalk. It looks on my drawing that full power might be through the switch. Any help on this, as with my side and head light switch I have to use relays. The Corsa uses a relay so I might have to put one of these in if the wiper motor works the same way.

Might have to work out how this works

Alan

[Alan Whitaker]

That's what I was thinking, well back to Penny then

[Alan Whitaker]

Not yet but I did check out another 3 indicator switches and the are all the same.

Just replaced the battery in the meter and I have the following
on Terminals 31 and WH I have continuity in all positions
53 and 53e continuity in position 2 and 3
53a and J position1 intermittent
53a and 53 position2 slow speed
53a and 53b position3 fast speed
53a and WO continuity in wash wipe

Thing is I have the S wiper motor

[Alan Whitaker]

It is a 2 speed motor with park

Alan

[Alan Whitaker]

Yes that's very good of you to do this, Many thanks

Alan

[Alan Whitaker]

Hi There is a pr of leads that goes to the pot the pot reads
20K scale short delay =5.20 on the long delay it reads 0.69





Alan

[Alan Whitaker]

Not urgent

[Alan Whitaker]

Should be able to get that relay.
wires are as you say but I have 2 black and yellows, looks like a .5 cable

Alan

[Alan Whitaker]

Just waiting for the relay, wired up the wiper 5 pin plug, fitted the new fuse box, was going to do it on wed as working mon/tues

Alan