Discussion
Hi guys,
simple one this ... I think.
I want to wire brush the mating surfaces between the disks and the wheels before I replace the wheels. Problem is I need to remove whats left of the old grease before I can get the wire brush to it. Any thoughts on what is best to clean off the old grease without giving me other problems in the future.
I'm probably thinking too much about this...sorry for the stupid question.
Kevin
simple one this ... I think.
I want to wire brush the mating surfaces between the disks and the wheels before I replace the wheels. Problem is I need to remove whats left of the old grease before I can get the wire brush to it. Any thoughts on what is best to clean off the old grease without giving me other problems in the future.
I'm probably thinking too much about this...sorry for the stupid question.
Kevin
I know what you mean Phil but I was getting terrible wheel wobble at speed so wanted to clean up the mating surfaces. Like you said I used an old rag due to lack of other suggestions and lack of guts to use a solvent in case it got somewhere I didn't want it and caused it's very own corrosion spot. I ruined a wire brush which is now loaded with grease but the wheel wobble has gone. I have re-greased the mating surfaces with aluminium grease.
Kevin
Kevin
Gassing Station | S Series | Top of Page | What's New | My Stuff