Discussion
Moring all.
You may allready know this. But no one I asked knew so. I have found that the brake servo used on the S1 is a Mk3 Fiesta unit which TVR mount upside down and use a SAAB 900 master cylinder on. I think you can also use the Fiesta master cylinder if you turn the servo around.
You may allready know this. But no one I asked knew so. I have found that the brake servo used on the S1 is a Mk3 Fiesta unit which TVR mount upside down and use a SAAB 900 master cylinder on. I think you can also use the Fiesta master cylinder if you turn the servo around.
Thanks for the info Steve. Ill bear it in mind. I havent started the engine up yet as she's still in bits after the winter chassis rebuild. But it will only be a few more days and ill check what you say.
Although yours may have been different, as I have visited the local SAAB breaker and the servos were different to the one on my car even though the master cylinder was the same.
Cheers Mick.
Although yours may have been different, as I have visited the local SAAB breaker and the servos were different to the one on my car even though the master cylinder was the same.
Cheers Mick.
Gassing Station | S Series | Top of Page | What's New | My Stuff