Front brakes, what to use!

[hallsie]

Im at the point of deciding on braking for the front of the FHC.

I have:-

390 SE vented discs with Granada calipers (with the spacer)

the original set of solid discs and Granada calipers (without the spacer)

I also now have a pair of AP four pot calipers that will need to have a spacer for the vented discs.

Now, do I keep it original, do I fit the SE set up, or do I fit the AP four pot calipers to either the solid disc or the vented disc??

Whatever way it goes down I will be sending the calipers off for rebuilding and anodising and I believe the spacer kit from the Granada set up will also fit the AP calipers.

On a side note, the Taimar is back on the road and running great again!!

Stu

[hallsie]

Mark, I might pop down the diner this morning, about 10 as usual?
Chris, if you are going can you put your timing light in the car so I can have a quick check up please??
Adam, I think Ill look at rebuild costs including the spacers on the AP's and go from there.

Rob, my apologies, Ive sent the interior photos this morning.

Stu

[hallsie]

Jack Valiant said:

Take it you did not go to the Diner then Stu??

I did, but I think you were tucked up in bed by the time I got there mate!!

Not working at the moment so will call you to see if you are about next week

Stu

[hallsie]

Mark, give me a call before you set off and ill get the kettle on!

Whats the score with Brands tomorrow? Ill pop along for a nose about!


Stu