Oil filter alternative
Discussion
Hi, I have bought and used both the Unipart GFE295 and Fram PH2821a filters in the past but now struggling to find a source, apart from one very expensive advert on eBay. I did use a Rimmer alternative but found that there was no non-return valve so I got cold knock on start up for 10-12 seconds. What alternative filters are you using that also have the non-return valve built in?
ElvisWedgely said:
Hi. Keith. There has been a mistake mate. I just checked my TVR 400SE and the one I'm using is Mahle OC 261 and not OC 132. It is a Rover V8 filter. You better check that order and make sure you get OC 261. Sorry about that, I wouldn't want you to fit the wrong one.
Tony. TCB.
Thanks Tony. The supplier also stock the 261 for an extra £1 so I've emailed them asking if I can cancel the first order and pay the extra for the 261. Cheers. KeithTony. TCB.
bradderztvr said:
Hi Keith,
The last filter I used was off fleabay with part number MA-P-OC132-A, and only cost £7 delivered to the door !(I think the seller was Doctor Car Parts or similar)
Cheers.
Thanks Roger. If I have issues with the Mahle one then I'll try your recommendation. I cant find either the Unipart GFE 295 or Fram filters at the moment and despite an oil change only 8 weeks ago I want to flush the engine as there's still obvious sludge in the pressure gauge area. I've got a new toy today - a proper oil pressure test kit with all the adapters - will give it a go Saturday to see what my real oil pressure is. You still ok for BBWF convoy across? Best if I meet you at Bromyard on way over? Also when do you want to set your new regulator up?The last filter I used was off fleabay with part number MA-P-OC132-A, and only cost £7 delivered to the door !(I think the seller was Doctor Car Parts or similar)
Cheers.
Gassing Station | Wedges | Top of Page | What's New | My Stuff