bulkhead steering bush

[Robert ody]

Hi Gents

After doing a bit of work on my wedgie today i noticed the bulkhead steering bush is a bit slack and with the front of the car jacked up and turning the steering from lock to lock it whines and moans and groans i was going to replace it before the MOT i would like to replace it with a bearing type rather than the bush. So any advice would be appreciated what is the best set up to use and where can i get the parts to do this job or is there anybody who makes this item all ready to use please


Regards Rob

[Robert ody]

cheers i will look into this


Rob

[Robert ody]

cheers gents the car is nice it has been stood for a few years it has done 39000 but i am now finding all the little niggles

cheers Rob

[Robert ody]

HI Guys my steering column seems to be 19mm if i get a bearing with an internal diameter of 19mm or 3/4inch will that fit or does it have to be 20mm ID as i see most have a grub screw



rob

[Robert ody]

HI Stog where did you get your bearing from please ? and do you have any details eg size or part numbers please


Rob

[Robert ody]

cheers

[Robert ody]

i managed to get my steering done at last i got a 3/4 bearing and the plates from bolton bearings feels much smoother now and there is no sloppiness now onto the next job


regards Rob