Air Filter (wash or replace)???
Discussion
Thanks for the replies gents. If I ever come round to yours Adam and you offer me a cup of tea, I'll make sure I have a spare mug in the car. I think the dish washer idea is out, unless you all want to attend my funeral.
I get the general idea now, that it is washable and reusable. The only problem is the cleaning kit costs around a tenner and the whole filter itself costs about 30 quid, so I'm sort of wondering if it's worth cleaning, or just buying a new one. Mmmmm. I'll have to think about this one. Am I right in saying the standard filter has the 3" diameter? and fits the Wedge. Still, I have the car here so I suppose I could pop in the garage and give it a measure. Thanks for all the advice.
Tony. TCB.
I get the general idea now, that it is washable and reusable. The only problem is the cleaning kit costs around a tenner and the whole filter itself costs about 30 quid, so I'm sort of wondering if it's worth cleaning, or just buying a new one. Mmmmm. I'll have to think about this one. Am I right in saying the standard filter has the 3" diameter? and fits the Wedge. Still, I have the car here so I suppose I could pop in the garage and give it a measure. Thanks for all the advice.
Tony. TCB.
Toby Tram said:
ElvisWedgely said:
The only problem is the cleaning kit costs around a tenner and the whole filter itself costs about 30 quid
But the cleaner will do more than one clean, surely!Adi
Tony. TCB.
Sorry Adam. I thought you said put it in the dishwasher, that's why I thought of bringing my own cup. As it's the washing machine, that changes things. Mind you the clothes might still come out a bit stinky in the following wash. The Mrs likes them smelling of roses not wd40.
Tony. TCB.
Tony. TCB.
I took the filter off yesterday and I put it in a bucket. Then I poured washing up liquid on and jet washed it while in the bucket. It is in fact a K&N filter and I did the jet washing on the softer spray, mainly from inside out of the filter. A lot of dirt came out and I was very pleaded with the results. Next, I wiped it dry and used a hair dryer to finish the job. Then, I mixed WD 40 and some filter oil I had at home from my model petrol racing car and gave the filter a good coating. After letting it all drain overnight, fitted it back on today. Job done and results look excellent. Cost, next to nothing.
Tony. TCB.
Tony. TCB.
Milky400 said:
Personally I would have used the suggested k and n kit and certainly wouldn't have jet washed it, also it's not recommended to dry it with a hair dryer type thingy as it drys it to quickly and can cause splits (I've seen it happen)
I've always used the proper kit and it does a really good job, one kit is plenty for 2-3 clean/re-oils
But what do I know.
It could be true, but the way I look at it when it splits I can replace it with a new one. I went to four different car spares shops to buy the correct cleaning and oiling stuff, including Halfrauds. Not one of them had even heard of it, let alone sell it. I know you can buy them on line but it's too much of a hassle and I'm too impatient. To tell you the truth, I was considering replacing it this time round, but when I took it off, it looked too good to scrap. Hence the home remedy.I've always used the proper kit and it does a really good job, one kit is plenty for 2-3 clean/re-oils
But what do I know.
Tony TCB.
Number 7 said:
mrzigazaga said:
Hi Tony....I think Howlfrauds stopped stocking the K&N kit...Why i don't know....They did have a piper cross filter cleaning kit which is almost identical....In future i would be careful using un-recommended oils especially on new filters as the sticking properties of the recommended oil was formulated for a particular purpose which is collecting particles and keeping them on the outside...Some oils like WD40 are penetrating oils so the dirt is likely to stick to it but get sucked through the filter and into the plenum...Sometimes even clogging the filter in a very short period of time.....I would check the air intake hose after a week to see if the hose has any oil in it....Just a thought....Ziga
Yep, probably wouldn't do the airflow meter sensor much good.Tony. TCB.
Gassing Station | Wedges | Top of Page | What's New | My Stuff