Wheel alignment settings
Discussion
I'm rebuilding my suspension with new bushings and need the suspension settings. I searched and found a couple of different sets.
Does anyone know the correct ones or have an opinion on these;
Front
toe in(mm) 3.2 +- 1.5
Camber(deg) 0+-0.5
Kingpin(deg Toe) 6 incline
Castor (deg) 3.0 +- 0.5
Back:
Toe in(mm) 4.5 +- 1.5
Camber(deg) 0.5+-0.5
Front:
toe in 0.5 degree
camber 1 degree negative
caster 3.5 to 4 degrees positive
Back:
toe in 2mm
negative camber 1 to 1.5 degrees
Charlie
Does anyone know the correct ones or have an opinion on these;
Front
toe in(mm) 3.2 +- 1.5
Camber(deg) 0+-0.5
Kingpin(deg Toe) 6 incline
Castor (deg) 3.0 +- 0.5
Back:
Toe in(mm) 4.5 +- 1.5
Camber(deg) 0.5+-0.5
Front:
toe in 0.5 degree
camber 1 degree negative
caster 3.5 to 4 degrees positive
Back:
toe in 2mm
negative camber 1 to 1.5 degrees
Charlie
Gassing Station | Wedges | Top of Page | What's New | My Stuff