Slave cylinder Speed6

[Marto]

Hello all,
I have just whipped off my gearbox as I have a weep coming from between the box and the bellhousing.
My suspicions were the slave cylinder, but it looks dry and nothing coming out. If it was the slave where would you generally see a trail of fluid come from.
My other suspicion is the plate fixed to the front shaft of the box, where the seal may be breached? This has recently been rebuilt, however.
Any assistance gratefully received.
Yours
Marto

[Marto]

Thanks for the replies.
Yes, pumped the Cluch with the box off and nothing looks to be coming from the slave. Looks all dry apart from the red assembly grease.
I have found gearbox fluid at the top of the box so I think the seal has gone on the top cover plate
I'll investigate that further......