Clutch master cylinder cover
Discussion
I've found the thread from Pete Mac in search, Pete if you read this are you up for making some?
Guys, I have all the gear, the gel coat for moulds the GRP mat, the resin, wax, release agent etc. but what I didn't have is a cover for the clutch master cylinder nor a way around making one. I had some ideas but the best option would be to take a mould off Quinny's if he is willing. My intention would be to produce moulds for all the hatches/covers and make them available to the Griff/Chimp fraternity. Haven't worked out how that would work yet as I hadn't planned to go into major scale production but I would like to share everything that I get out of this - anything to keep these cars on the road - I also need to finalise how I'm going to fix the hatches.
Quinny, I could PM you my address with a promise not to break it. I am back to Kazakhstan next week for 5 weeks but then could take a mould off your cover as soon as I get back, say 2nd week in December and then get it straight back to you - if I fcensoredk it up (which I don't intend to), then I promise to replace it.
PeteGriff seems to be a bit of a mentor on the production side. Pete, got any better ideas?
Pete
Edited by eff eff on Tuesday 23 June 09:49
No Racetech sell the standard one fixed with silkaflex or similar I'm talking about the one in the picture fixed with screws
http://thumbsnap.com/sc/5dR5cJAZ.jpg
http://thumbsnap.com/sc/5dR5cJAZ.jpg
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff