Android Rovergauge
Discussion
Hello
I had some spare time recently and wrote an Android Rovergauge.
I used the open source libcomm14cux library as a reference.
I'm more or less complete and have a few minor bits to finish off.
Kind regards
Aide
I had some spare time recently and wrote an Android Rovergauge.
I used the open source libcomm14cux library as a reference.
I'm more or less complete and have a few minor bits to finish off.
Kind regards
Aide
blitzracing said:
How does the hardware interface between the Android device and the ECU?
I used the beautifully made Rover V8 14CUX interface cable off the PH classifieds and a USB OTG cableSo, if you already have Rovergauge running on your laptop and wanted to use the android version you would just need the OTG cable.
rigga said:
Very interested in this as I have roverguage but never loaded it on my flakey laptop, but have a nice Android tablet and otg cable already.
Flaky laptops don't help, especially when you're on the road or not at home.Having all the diagnostic info and being able to use your phone to quickly and simply check over everything before you start the car (of if you're stuck in traffic) is really handy.
The app has a few other features as well like:
-o- A GPS speedometer with acceleration and lateral-G meters
-o- Full custom dial layouts that can be saved and shared
-o- The ability to remember the max and min dial values (i.e. on the water temp dial)
-o- Full HUD mode
-o- Data logging
and a few more here and there..
I'm going to call it: RS-RV8
Kind regards
Aide
Gassing Station | General TVR Stuff & Gossip | Top of Page | What's New | My Stuff