Geometry - degree to mm conversion
Discussion
The reason I ask is that I found some geo settings online and was wondering how closely my settings match.
Front toe: 1mm toe out overall
Front camber: 1 degree negative each side
Rear toe: 2mm toe in overall
Rear camber: 1 degree negative each side
Unfortunately the toe is in mm rather than degrees.
Front toe: 1mm toe out overall
Front camber: 1 degree negative each side
Rear toe: 2mm toe in overall
Rear camber: 1 degree negative each side
Unfortunately the toe is in mm rather than degrees.
Gassing Station | Suspension, Brakes & Tyres | Top of Page | What's New | My Stuff