Gtechniq advice
Discussion
johnS2000 said:
Sorry but "the latest" Gtechniq sealant is for professional use only !!
You will not be able to buy it in the first place.
I'm considering EXO V2 and C1 crystal lacquer and the C5 for the wheels, on the Ultimate Finish site it mentions nothing about 'professional use', I will contact them directly. I've used Nanolex previously and was not blown away, but wondered if claying and sealing before treatment is not the way to go with the new sealants? You will not be able to buy it in the first place.
johnS2000 said:
OK . I apologise .The latest coating from Gtechniq is Crystal Serum and seems to be head and shoulders above all other sealants but is available only to the pro's.
With C1 you need to make sure the paint is as clean as possible which does mean de-ironising/de-tarring and then claying if needed followed by an IPA wipedown or the panel wipe
Ta, sounds like a lot of work, might leave it to a pro!With C1 you need to make sure the paint is as clean as possible which does mean de-ironising/de-tarring and then claying if needed followed by an IPA wipedown or the panel wipe
johnS2000 said:
It's far better to listen to the pro .
Therein lies the problem John, I'm a bit old school and worry about not sealing the paint after using a clay bar, but looking at Iplods efforts convinces me that straight to C1 after a panel wipe would be ok. Tempted to enquire about Crystal Serum though, hearing great things but does anyone know what it would cost for a professional job?Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff