what epoxy primer and topcoat?
Discussion
I want to paint a chassis and trailer. I have decided to strip it totally to the metal, so don't want to use anything like por-15. I know stripping to the metal will be much harder work, but I have decided it's the way to go. These are my desired steps:
1) strip to metal with angle grinder / drill wire brush and then clean thoroughly with alcohol.
2) use epoxy primer on bare metal
3) use a good top coat
If possible I don't want to have to do any more stages (sanding etc), and believe there are some top coats that you can put directly on epoxy primer. So what would people recommend?
1) strip to metal with angle grinder / drill wire brush and then clean thoroughly with alcohol.
2) use epoxy primer on bare metal
3) use a good top coat
If possible I don't want to have to do any more stages (sanding etc), and believe there are some top coats that you can put directly on epoxy primer. So what would people recommend?
Edited by Adam32 on Sunday 5th March 17:22
Gassing Station | Bodywork & Detailing | Top of Page | What's New | My Stuff