Peugeot 306 HDI windscreen washer jets not working
Discussion
Assuming that this will be a failed pump as when you try to activate the windscreen washers the wipers kick in but the washer pump does not.
A quick google seems to indicate that the washer pump is on the side of the bottle, access via the drivers wheel arch?
Has anyone taken this job on, any top tips?
Found the washer pump below, I assume I need a twin port (one for front screen and one for the rear?)
http://www.eurocarparts.com/ecp/c/Peugeot_306_2.0_...
Any help and guidance gratefully received
Awesome, thanks!
Old Merc said:
Its a simple job,a few screws and plugs around the wheel arch cover,pull it back to expose the washer bottle.The pump just pushes into a grommet in the bottle,simple multi plug and two washer pipes.
Mind you before you go fitting a new pump,it would be a good idea to put a test light on the plug to make sure you have feed there when operating the switch.
Mind you before you go fitting a new pump,it would be a good idea to put a test light on the plug to make sure you have feed there when operating the switch.
Gassing Station | French Bred | Top of Page | What's New | My Stuff