AC temp control
Discussion
Has anyone had any problems with their A/C heat control? My A/C was working fine but the last few drives it hasn't worked. Had a look today, the switch I assume seems to either be getting stuck or something inside isn't doing what it should.
Checked the voltage on the the sensor on the drier and it was very low, 0.something, but manipulating the switch it came to life and the fan and A/C started up again. Checked the wiring continuity and all is good.
It's all pointing to the switch, but this is a pretty simple device so am wondering if anything else could be causing it? If not, where can I get a replacement from?
Thanks
Checked the voltage on the the sensor on the drier and it was very low, 0.something, but manipulating the switch it came to life and the fan and A/C started up again. Checked the wiring continuity and all is good.
It's all pointing to the switch, but this is a pretty simple device so am wondering if anything else could be causing it? If not, where can I get a replacement from?
Thanks
Gassing Station | Ultima | Top of Page | What's New | My Stuff