Discussion
Hi guys,
Recently joined PH and this is my first post. I'm coming to the end of my Ultima GTR build. Still a fair few bits and pieces to see to and cosmetic stuff which always seems to take up the most time. I'll try and upload a few pics over the next few days. Is there anyone local to the great barr / Sutton Coldfield area?
Recently joined PH and this is my first post. I'm coming to the end of my Ultima GTR build. Still a fair few bits and pieces to see to and cosmetic stuff which always seems to take up the most time. I'll try and upload a few pics over the next few days. Is there anyone local to the great barr / Sutton Coldfield area?
≥≥Hi,
The kit was delivered early 2005 and I started the build pretty much straight away, with help from my father. Things progressed well for a while then other commitments meant I could only do a bit here and there, so that's why it's taken until now to see the end in sight.
I've made frequent calls to the ever helpful factory when something wasn't quite going to plan. The one thing that caused me the biggest headache was sorting the gear linkage (RH) selecting reverse was impossible at one point.. The slightest play at any point is fatal, anyway it's sorted now.
If I were to start again or maybe build another the one thing I would do different is to get the factory to pre fit the body. It would have saved me lots of hours, headaches and bald spots.
Have a look at the pics below, your feedback and questions are appreciated.
One thing I do need to do is tune the Holley carb it will not idle on cold start, when warm it seems ok, I know the cold idle can be sorted using vacuum gauge. Has anyone done this themselves or called an expert in. The engine is a 640bhp 6.3l ( it's the one the factory used in their original record breaking car).
Regards.
The kit was delivered early 2005 and I started the build pretty much straight away, with help from my father. Things progressed well for a while then other commitments meant I could only do a bit here and there, so that's why it's taken until now to see the end in sight.
I've made frequent calls to the ever helpful factory when something wasn't quite going to plan. The one thing that caused me the biggest headache was sorting the gear linkage (RH) selecting reverse was impossible at one point.. The slightest play at any point is fatal, anyway it's sorted now.
If I were to start again or maybe build another the one thing I would do different is to get the factory to pre fit the body. It would have saved me lots of hours, headaches and bald spots.
Have a look at the pics below, your feedback and questions are appreciated.
One thing I do need to do is tune the Holley carb it will not idle on cold start, when warm it seems ok, I know the cold idle can be sorted using vacuum gauge. Has anyone done this themselves or called an expert in. The engine is a 640bhp 6.3l ( it's the one the factory used in their original record breaking car).
Regards.
Edited by djb222 on Sunday 6th April 13:04
Gassing Station | Ultima | Top of Page | What's New | My Stuff