Dry sump LS7 oil change
Discussion
Ult-Jim said:
mt308 said:
Just mid way through now, grateful if anyone can answer these questions:
1. Are there 2 sump drain plugs?
2. Do I also undo the drain plug in the oil tank, and if so does this need any thread seal when going back in?
3. Torque wrench settings for both please?
Yes mine has two drain holes, one underneath and one on the side I think closer to the oil filter.1. Are there 2 sump drain plugs?
2. Do I also undo the drain plug in the oil tank, and if so does this need any thread seal when going back in?
3. Torque wrench settings for both please?
Not sure about the oil tank, I have never needed to as nearly all the 7.6 litre (8 quarts) quantity pours out from the sump.
Filter & drain plugs torque is 18 lb/ft.
My instructions say fill 7 quarts, run engine for 15 seconds at idle and add the final 1 quart of oil.
Ult-jim.
Gassing Station | Ultima | Top of Page | What's New | My Stuff