HELP WITH RING GEAR

[ROWDYRENAULT]

Hi guys: My GTR suffered a starter ring gear failure of 3 teeth. I took the assembly apart and took pictures in the process. Now I am reassembling and I see something that confuses me, (not that it takes much) The ring gear as I received it from the factory was mounted with the small step towards the engine. Now I am questioning this orientation because it looks as if the step would clear the outside of the flywheel and allow the ring gear to be closer to the clutch and starter. Any help? Lee

[ROWDYRENAULT]

THOUGHT i WAS GOING TO BE ABLE TO POST A PICTURE BUT ITS TO BIG. if somebody had a close up of the ring gear and could post it as installed that would be a great help. lee

[ROWDYRENAULT]

Thank you for taking the time to answer. Unfortunately yours is a bit different then mine. ood luck with your project. Lee