Ultima Fuel System Install Questions
Discussion
Hi Guys
I have a couple questions concerning the factory twin-tank system installation - there is a box with a ALOT of parts, and I just want to make sure I am doing things the right way:
I have the basic layout from the build manual, and think I know where everything goes (in what order), however, I have questions concerning the installation to bulkhead:
1) How are the 100-micron and 10-micron filters held in place on the bulkhead? They do not have any holders/brackets attached to them?
2) How is the HP pump held onto the bulkhead? There are 4 rivnuts, and 4 bobbins included in the kit. Do the bobbins insert into the rivnuts to install?
3) The HP pump kit also includes: 2 anodized fittings, a black fitting (??), 2 copper washers, 1 larger copper washer - what are these for?
Also, if anyone has pictures of the factory Ultima system install, please post - most the pictures I have found are not clear enough to see the types of details I am looking for..
Thanks
I have a couple questions concerning the factory twin-tank system installation - there is a box with a ALOT of parts, and I just want to make sure I am doing things the right way:
I have the basic layout from the build manual, and think I know where everything goes (in what order), however, I have questions concerning the installation to bulkhead:
1) How are the 100-micron and 10-micron filters held in place on the bulkhead? They do not have any holders/brackets attached to them?
2) How is the HP pump held onto the bulkhead? There are 4 rivnuts, and 4 bobbins included in the kit. Do the bobbins insert into the rivnuts to install?
3) The HP pump kit also includes: 2 anodized fittings, a black fitting (??), 2 copper washers, 1 larger copper washer - what are these for?
Also, if anyone has pictures of the factory Ultima system install, please post - most the pictures I have found are not clear enough to see the types of details I am looking for..
Thanks
Those pics are great!! Thanks!
The kit supplied now is slightly different: There is no link between the two upper tank links (Ultima supplies little fittings to block those ports). However, I am thinking to still link the two uppers, and have a common air vent - is that a good idea, or should I leave it as factory with individual vents on each tank?
The kit supplied now is slightly different: There is no link between the two upper tank links (Ultima supplies little fittings to block those ports). However, I am thinking to still link the two uppers, and have a common air vent - is that a good idea, or should I leave it as factory with individual vents on each tank?
Gassing Station | Ultima | Top of Page | What's New | My Stuff