Lamona oven?

[steve1]

One of our tenants has reported the oven not getting hot, upon inspection I've noticed it's a make that I'd never heard of before, Lamona, but it seems that it's widely used by Howdens.
This is not a new model, it's the LAM3202, what I'm after is some info on where the element is situated, hopefully just wants replacing, but ovens I've done before have had a simple plate at the back of the inside of the oven that you unscrue to gain access to the element.
I might add that this is not a fan oven.
Thanx.

[steve1]

CorradoTDI said:

It's Howdens own brand... fairly cheap and cheerful but being basic should be easier to fix

I do hope so, but I need to get the element out for our local shop to try and match it.

[steve1]

Thanx for advice, very helpful.
Will visit 2morrow and commence stripping!

[steve1]

Just to update this thread, found the bottom element, ( which was oven out jobbie and unscrew the bottom plate ), was the problem, element was fine, a wire had come off, hopefully no more trouble, ( lives to regret saying that, lol ).
Thanx for all info supplied.

[steve1]

They'd reported saying that it wasn't working originally, but upon inspection, and reading the manual, and through posts on here, I realised that it worked using the 2 elements, so after checking the top element was working ok I then targeted the bottom one, ( after I found out where it was ), again, thanx to replies on here.