Mixer Shower Recommendations

Mixer Shower Recommendations

Author
Discussion

chris_c201

Original Poster:

255 posts

198 months

Tuesday 30th September 2014
quotequote all
Hi all,

Previously posted about an issue with poor flow rate abs pressure in a tower shower despite good inlet pressure.

Summary now being I'm scrapping the shower and looking to put in a new mixer with maximum pressure and flow rate.

It's fed by a system boiler with large megaflo style tank and the feeds are at 3 bar.

Not bothered whether it's concealed, panel, exposed, digital, dual head etc just that I'll achieve the objective of having a luxury shower that can rinse my hair and ideally tear my skin off :-)

Been looking at mira platinum that says flow rate of 16l/pm at 1.0 bar which is far better than the 9l/pm I'm getting currently at 3 bar!

Any input appreciated,
Chris

chris_c201

Original Poster:

255 posts

198 months

Tuesday 30th September 2014
quotequote all
Thanks for the feedback folks, for those recommending the aqualisa digital, are you basing on experience and if so was it the high pressure setup as opposed to pumped?

Anyone ever measured pressure / flow rate?

chris_c201

Original Poster:

255 posts

198 months

Thursday 2nd October 2014
quotequote all
Griff Boy said:
Best shower for flow rates us a simple Mira Excel. Been around for years, still out performs anything similar, not the prettiest, but does exactly what is says on the tin!
C20l/pm at 1.0 bar, could have a winner!

Anyone else got one and would recommend / critique?

chris_c201

Original Poster:

255 posts

198 months

Friday 3rd October 2014
quotequote all
Right... i'm officially now at analysis paralysis... can tell i work in business change.

So, the Grohtherm 2000 has two variants, EV (3/4") and "New" (1/2") only the EV is the older one with older style handset but higher flowrates.

I'm going to put up my short-list and throw a dart and be done with it... as someone mentioned, the models mentioned (Mira Excel / Platinum, Grohtherm 2000 etc) will all work and all a darn sight better than my current restrictive, rats nest of pipe-work panel shower.

Thanks for all the input!
Chris

chris_c201

Original Poster:

255 posts

198 months

Saturday 4th October 2014
quotequote all
So I'm 99% on the grohtherm 2000 ev (3/4" valve), quick question I can't find the answer to online;

Is the the hot and cold feeds still 15mm inlets?

chris_c201

Original Poster:

255 posts

198 months

Wednesday 15th October 2014
quotequote all
Well, quick update now i've decided and installation complete;

- Removed the panel shower
- Installed Grohtherm 2000 3/4" mixer bar, rated at 42 l/pm (3 bar)
- Tempesta Duo handset

I've not measured the flow and don't need to, it's 100 times better than previous setup and a nice powerful shower on either of the handset settings.

Will likely buy a RainDance E120 shower head at some point as had one recently when in a holiday cottage and liked the variety of settings, only thing is they are rather pricey for a shower head!

Anyway, thanks for the advice from the folk that input to the thread!

Chri