Dimmer LED Flickering
Discussion
I was wondering if anyone can shed some light (excuse the pun) on an issue I am having with dimmer LED Bayonet bulbs.
I have a twin dimmer switch down stairs, one controls lounge lights and other does landing. When I switch on the upstairs light using the switch downstairs after a while the light starts flickering on and off, any ideas as I have it with two of the same bulbs now. Upstairs switch is a standard rocker switxh of that makes a difference.
TIA
I have a twin dimmer switch down stairs, one controls lounge lights and other does landing. When I switch on the upstairs light using the switch downstairs after a while the light starts flickering on and off, any ideas as I have it with two of the same bulbs now. Upstairs switch is a standard rocker switxh of that makes a difference.
TIA
Cats_pyjamas said:
Are the LEDs dimmable products?
Are the dimmers LED specific dimmers.
If yes to the above, maybe fit a standard switch instead of the dimmer, could be the lamps are breaking down or the dimmer is broken down.
Thanks for your reply. Are the dimmers LED specific dimmers.
If yes to the above, maybe fit a standard switch instead of the dimmer, could be the lamps are breaking down or the dimmer is broken down.
The LEDs are dimmable compatible, as for the dimmer switch it’s been over 10yrs old so I very much doubt it’s led specific.
zalrak said:
I had a similar issue. Replaced with these type of switch, problem solved:
https://www.screwfix.com/p/varilight-v-pro-1-gang-...
You may need to program the switch, however in my case that was not needed.
How would they need programming, thought a switch was a switch lol.https://www.screwfix.com/p/varilight-v-pro-1-gang-...
You may need to program the switch, however in my case that was not needed.
Also I see some have a max load etc. 3 bulbs at 4w each should be ok with this one?
https://www.screwfix.com/p/lap-2-gang-2-way-led-di...
swisstoni said:
Mating LEDs and dimmers seems to be about as easy as mating Pandas.
I had a quick look into the technicalities a few years ago and there was leading edge and trailing edge types which liked different types of bulbs …
I eventually adopted the swap things until they work approach.
Haha didn’t think a simple task had to be looked into to in-depth either. I had a quick look into the technicalities a few years ago and there was leading edge and trailing edge types which liked different types of bulbs …
I eventually adopted the swap things until they work approach.
Gassing Station | Homes, Gardens and DIY | Top of Page | What's New | My Stuff