At a guess.....

Author
Discussion

Upatdawn

Original Poster:

2,184 posts

149 months

Sunday 20th July 2014
quotequote all
My aircon isnt working, the pump has an electrical connection right ate the front near the drive pulley, now could that be a feed to an electric clutch of some sort? or a sensor to tell the system the pumps running?

the plug and wires look very exposed




Upatdawn

Original Poster:

2,184 posts

149 months

Sunday 20th July 2014
quotequote all
with this car electrics are always a problem so checking connections and feed would be a good start, if theres no feed and its 12v I could rig up a bypass feed (fused) maybe, bugger these hot days!

Upatdawn

Original Poster:

2,184 posts

149 months

Sunday 20th July 2014
quotequote all
steve2 said:
Mine had a broken wire on the plug that goes into the compressor, fixed that and all works great now so check the wires first.
Dear God, please make it that simple.......



Upatdawn

Original Poster:

2,184 posts

149 months

Monday 21st July 2014
quotequote all
had it gassed and its working.....for now


there was some pressure in it


i wondered about trying one of these


http://www.ebay.co.uk/itm/Car-Aircon-Air-Con-Air-C...

Upatdawn

Original Poster:

2,184 posts

149 months

Monday 21st July 2014
quotequote all
Matt Seabrook said:
Just for the benefit of others thinking about doing this, please don't unless you want a big explosion. The compressor is regulated and you will bypass this by giving it a feed. biggrin
It would have been only to see if the clutch pulled in, but i dont need to now