996 Window Regulator
Discussion
I have now fitted a new window regulator but the window won't open fully, their are no issues with it closing, or when I open and close the door.
The part number of the new item fitted matches the part number on the unit I removed. The window carriers bottom out on a mechanical stop on the left arm, so don't appear to be able to go any lower. The window is sitting in the rubber protector within the carrier, and the carrier clamp bolt is in the lowest position. There are 2 adjustor screws - one on each window carrier, but these appear to limit the window closing not opening.
Has anyone had this problem before, and can help? Is there anything in the photo showing an obvious F.U. I have made?
Cheers
The part number of the new item fitted matches the part number on the unit I removed. The window carriers bottom out on a mechanical stop on the left arm, so don't appear to be able to go any lower. The window is sitting in the rubber protector within the carrier, and the carrier clamp bolt is in the lowest position. There are 2 adjustor screws - one on each window carrier, but these appear to limit the window closing not opening.
Has anyone had this problem before, and can help? Is there anything in the photo showing an obvious F.U. I have made?
Cheers
Gassing Station | 911/Carrera GT | Top of Page | What's New | My Stuff