This is handy, just bought a track 944
Discussion
Just bought a 944 track toy for the lad and me to play with a do up. Will be a long term project, he is only 15 but car mad like his dad. Will be hoping to pick up advice and keep all updated with progress. Not picking up to the weekend but first pre collection pics and some spec below.
Would appreciate comments (good and bad) and advice as well. Lad will be posting as we go and asking questions so be please be patient with him
Porsche 944lux road Legal track Car. Rothmans replica 2.5 8v
6 point weld in roll cage with harness bar.
Drilled and grooved front brakes, greenstuff pads all round
braided brake lines
fuel and brake lines run internally
uprated fuel pump
new fuel pump relay
fly-off handbrake
falken ziex tyres
quickshift induction kit
omp steering wheel
race mirrors
FULL Rothmans replica vinyl wrap
lightweight fixed back bucket seats with porsche and rothmans logos
TRS 6-point harnesses
Polycarb windows with sliders
carbon fibre footwell plates inc alloy footplates for passenger side
new alternator
new battery
custom straight through exhaust with mk2 x-flow rally back box
flip switch and push start ignition system
Would appreciate comments (good and bad) and advice as well. Lad will be posting as we go and asking questions so be please be patient with him
Porsche 944lux road Legal track Car. Rothmans replica 2.5 8v
6 point weld in roll cage with harness bar.
Drilled and grooved front brakes, greenstuff pads all round
braided brake lines
fuel and brake lines run internally
uprated fuel pump
new fuel pump relay
fly-off handbrake
falken ziex tyres
quickshift induction kit
omp steering wheel
race mirrors
FULL Rothmans replica vinyl wrap
lightweight fixed back bucket seats with porsche and rothmans logos
TRS 6-point harnesses
Polycarb windows with sliders
carbon fibre footwell plates inc alloy footplates for passenger side
new alternator
new battery
custom straight through exhaust with mk2 x-flow rally back box
flip switch and push start ignition system
GC8 said:
Six point weld in?
No mention of suspension (which is required, expensive and never omitted from a decent car), so I will be pessimistic/negative until proven to be wrong. Hopefully it wont be a bad car and I do hope that you havent spent too much on it.
Not laid out cash yet and final deal to be done on inspection, he is looking for 2.5k. Would appreciate any tips on what I should be looking for and advice on price. No mention of suspension (which is required, expensive and never omitted from a decent car), so I will be pessimistic/negative until proven to be wrong. Hopefully it wont be a bad car and I do hope that you havent spent too much on it.
thegoose said:
GC8 said:
May I suggest that you join the PCGB 944 forum? Its free and you neednt be a PCGB member. TIPEC is worthwhile too.
It does seem like a strong price for what is essentially a low value car with a (presumably) cheap rollcage and seats, some trinkets but no real prep.
I thought your comment was right....then I realised I mis-read it. I thought you'd written doesn't seem like a strong price!It does seem like a strong price for what is essentially a low value car with a (presumably) cheap rollcage and seats, some trinkets but no real prep.
If it's what you're after and is in sound condition this looks much better value than trying to create anything similar from scratch.
I kinda thought 2.5k for a car already at this stage was good value, then again i really don't know jack st about them at this stage so open to all views
Thanks for all the replies guys, will have my list of look for bits and questions ready now for Sunday. It is a road legal car, I will though not be using it as such. It really is very much a base to go with for a long term project for my lad. Not worried about spending money on it and intended to do this anyway to get it right and ready for racing so not having race suspension is not an issue and will be our first task
What I really want from the car as I said is good base to start from and it looks like it is.
What I really want from the car as I said is good base to start from and it looks like it is.
GC8 said:
You can buy new for about £550.
I have one which was perfect until about five years ago when my garage froze and it now has a tiny crack between two of the vents - it has been stable ever since.
I alternate between intending to keep it and considering selling it. Its as rare as unicorn ste so I realise that it will be virtually irreplaceable, but I doubt that I will own a 924 dash car again now that I am no longer looking for a 924 Turbo.
If you intend to keep the car then I may sell it if youre interested. Id prefer to sell to someone who is restoring a car though.
Could live with a tiny crack How much are you looking for it, would deco be in a good home I have one which was perfect until about five years ago when my garage froze and it now has a tiny crack between two of the vents - it has been stable ever since.
I alternate between intending to keep it and considering selling it. Its as rare as unicorn ste so I realise that it will be virtually irreplaceable, but I doubt that I will own a 924 dash car again now that I am no longer looking for a 924 Turbo.
If you intend to keep the car then I may sell it if youre interested. Id prefer to sell to someone who is restoring a car though.
Gassing Station | Front Engined Porsches | Top of Page | What's New | My Stuff