Noble sequential gearbox .

[TuxMan]

Realeased on the stand at Autosport was Noble Martins 6 speed fully sequential gearbox .
designed buy himself (he is a clever bugger ) it works great and will be one of the biggest improvements to lap times there is .
i had a play and it work superb , rated at something like 700ftlb of torque and 700bhp it should be plenty strong enough for any of the big Bhp engines .
gear ratios have been adjusted with a longer first and sixth with all the gears in between adjusted to give the best performance.
you will also be able to use it with a std H pattern setup as well as the sequental setup .





more info to follow .

Tux

[TuxMan]

Hi Mark yes clutchless changes , Jetstream will be the approved fitting center , gearbox has been on the dyno and been checked now we need to road test , hopefull this will commence over the next few months . cost wise depends on the level you want to go for and labour charges are not confirmed but it looks like it going to be in the region of 10 to 11k for the full package, fitted .

Tux

[TuxMan]

Hi Graham , only part of the std box used is the casing's , everything else is replaced , yes no ecu included if you want the ability to flat shift .

Tux

[TuxMan]

if you have a ecu that will support a flat shift then the box will work fine , but anyone who want to keep the std mbe ecu will have to lift , no great problem , i shall stick with the H pattern and std ecu and just upgrade the box so i,m able to run whatever power i require . in the end it comes down to how much you want to spend , no reason why you cannot start with the box then upgrade to the sequential system and ecu as you can afford it .

[TuxMan]

Hi Craig , no problems happy for your input !! , the casings are a concern but the gear cluster is a cleansheet design and is a lot stronger than the std setup . we need to test the box thoroughly though , there are also modifications that will help the casings cope with the extra load .

Tux

[TuxMan]

Hi Gadge , no , no and No .
Tux