LED NOBLE REAR LIGHTS
Discussion
Ok so i had a bit of spare time this week end,to look at improving the look of the rear lights. These arnt finished yet,but you can see where im going with them.Im pretty happy with the outcome so far. I wanted to do something with them some time ago, but was way too busy with other projects.
PS; these LEDs are BAF
PS; these LEDs are BAF
Edited by tonyvan on Monday 1st February 20:13
Midlifecrisis71 said:
Looking good....... can I ask, are you going to tint or spray black the old part of the lens ? Also how do you trim the edge where the circles meet the old lens, particularly as the indicator lens is on a curved piece of the outside edge of the old lens.
Just interested to learn more about what you've done
Yes they will be colour coded to match inner clam panel (black)and cleaned up. Holes are perfect circles,so no gap issues.Just interested to learn more about what you've done
Edited by tonyvan on Wednesday 3rd February 07:33
coolchris said:
Me personally think Tony's lights look a lot better and the finished product is not there yet I think its the carbon look on he lenses that don't look right dare I say max power ish but taste is a very personal thing and I realise its everyone to there own
Hi Chris,yes your right,you can do a DIY job,but i wanted to try something that could be returned to standard if ever need be,and i wanted to do something that looked like a "profesional job" opposed to one that looks like a diy bodge job using the origional housing all be it that they are modified somewhat.My take on the mod was never that i was the first to do it,but to have an alternative to the trailblazers and afterburners lights that arnt avaliable anymore. Actually now looking at them, i do prefer what ive done,and budget wise the cost diff was massive.
Housings are now in paint,but look better and better as the process comes along.
AMG Merc said:
Good attention to detail there as always Tony I only have one design comment - and it may be the photo, or the fact that the design is in progress - but the outer light unit being offset looks odd to me. The autogyro in my eyes feel it should align along the same (horizontal and vertical) plane as the inner one (not necessarily inline though). As it is it looks slanted outwards.
Question - what happens with the lights in the original unit behind - do they still work are they now dummy?
Good observation Rob,and yes your right in the pic, the outer led cluster it is slightly offset. I hadnt made the modification to level the outer led with the inner one before the pic.I had only just modified the casing and was checking to make shure both light clusters fitted in the cutouts.Trust me for being hasty!!!!Question - what happens with the lights in the original unit behind - do they still work are they now dummy?
In answer to the second question..... NO and NO
Blu3R said:
Just a few questions:
How on earth can you return yours to standard once you've cut holes in them and painted them?
How will yours look professional vs bodge when you're using the same originals as GC1 has?
The LEDs I've seen available come to around £200 on their own so are those you're using significantly cheaper? If so where are they from as I'd like to take a look.
Thanks
ok so wot i ment was i have the original lens boxes. Ive sourced some more which ive modded.No alterations or mods to the wiring or body work have been made,so i can return the standard lenses in at any point. should have explained myself a little clearer.By a professional finish,ive seen said lenses and i wanted the finish to look just that bit neater, nor did i want the leds to be recessed into the lens covers.personal choice.How on earth can you return yours to standard once you've cut holes in them and painted them?
How will yours look professional vs bodge when you're using the same originals as GC1 has?
The LEDs I've seen available come to around £200 on their own so are those you're using significantly cheaper? If so where are they from as I'd like to take a look.
Thanks
Thanks guys for your positive comments. As always I keep getting sidetracked doing other things but I will try and get into the garage this weekend and get to the back of the car and put one in place and take some pics. Fitted my new carbon fibre steering wheel instead.
Sorry about the dark picture but the car is covered over and I haven't yet fitted strip light in the garage.
Sorry about the dark picture but the car is covered over and I haven't yet fitted strip light in the garage.
2.5bluenob said:
Tony they look pretty well made! Have you actually had them on the car and someone behind tell you that they are able to see the lights when they are on?
No i havnt installed them to the car, They are ready to be fitted,but so many other things to do.Once i get the time and space to get the clam up, il get them fitted and take some pics.All i will say, is that ive covered the issues that u have asked about and i can say that the light sourse is visable from extreme angles,and 10 times better than the original lights.The light sourse from the LEDs are as bright as fook!!!
wessexrfc said:
haha, I'll let you off. We incorporated the fog and reversing light into the cluster (halfway down page):
http://www.pistonheads.com/gassing/topic.asp?h=0&a...
hi, yes i saw those design sketches, but must be honest,i didnt like the lay out.Just looked too cluttered. inmohttp://www.pistonheads.com/gassing/topic.asp?h=0&a...
just wanted a simple clean look incorporating all functions in just the two cluster pods.
Gassing Station | Noble | Top of Page | What's New | My Stuff