Vixen - Stub axle spacers?
Discussion
Thank you all for your replies.
Adrian I suspected the same, thank you for the confirmation. However am I correct to think that the distance between the two inner races of the bearings should be identical to the TR6?
The car is for circuit racing, all components except the hubs and steering arms are new, I have experienced slight extra brake pedal travel upon the first application of the brake pedal after high speed corners. The car does not have big tyres just 185/55-r15 semi slicks, it is like the stubs are flexing a little causing the pads to recede.
Adrian I suspected the same, thank you for the confirmation. However am I correct to think that the distance between the two inner races of the bearings should be identical to the TR6?
The car is for circuit racing, all components except the hubs and steering arms are new, I have experienced slight extra brake pedal travel upon the first application of the brake pedal after high speed corners. The car does not have big tyres just 185/55-r15 semi slicks, it is like the stubs are flexing a little causing the pads to recede.
Gassing Station | TVR Classics | Top of Page | What's New | My Stuff