1000 hp T62 SRD Supra Build

[jay_NW]

Hi everyone, I would like to share my supra build which started end of 2012 with you guys.

I wanted to build a nice clean street car that would also compete on the track and keep the look close to stock as possible.

It started out as a stock 3.0 with a T51R kit.

Built has been carried out by SRD.

After discussing requirements with SRD a 3.4 stroker with a HKS T62r was decided upon, as the heart of the build.

Bodywork wise a NUR Motorsports widebody kit was purchased. The car then was sent to Autobody solutions... Plans then evolved as the work went on and this was the start of the build!

Full and final spec will Include:

SRD 3.4 stroker
SRD Race head and cams
HKS T62R Turbo Kit
Syvecs S8 management
Ikeya formula suspension
Custom HRE Widebody wheels
Etc..

Final spec will be released on completion.

Here's some pics of the journey so far.

How it arrived at the bodyshop :









Then decided to get the engine bay completely smoothed out, so it would be pretty unique to other builds here in the UK

[jay_NW]

Arch work now starting

[jay_NW]

Cut the stock inner wheel house outer off, bonded this to the new rear wing and welded in plates to fill the gap.






Tailgate work

[jay_NW]

[jay_NW]

[jay_NW]

Subframe bolts being sprayed as well

[jay_NW]

Underside

[jay_NW]

[jay_NW]

The car is now on it's way to SRD for the final build pieces to be put together and installed.

As of now the bodywork is 100% complete and here is how it stands for now:









No engine or interior yet, so looks a little high

[jay_NW]

Thank you for all the nice comments guys, appreciate it. Will post some updates in a bit.

DanielSan said:

Come the day you sell this don't buy a GTR whatever you do...

GTR is a very nice cars but I wouldn't sell this car to buy one

Mastodon2 said:

I know to some people, white paint is just white paint, but that is a really, really good white. The only thing I don't like is the wheels, there are nicer wheels out there, but I'm guessing that perhaps these are not the final wheels the car will have?

Very excited to see further updates on this, top work.

Thanks mate, they are the final wheels.

anonymous said:

[redacted]

Thank you, they are Facelift ones. Bought it from Toyota dealers UK.

samdale said:

Awesome, look forward to seeing it all come together!

P.s. can we call you JamieP?

Amirhussain said:

Loving your OP, probably the cleanest Supra I've ever seen, who the fk is JamieP?!!

Jamie is a popular guy here hey. He is the man if you want any tuning advice on Supra or GTR. Got allot of advice from him towards this build and mods. He now have a nice R35 GTR.

Same company that built his black Supra is building my car now.

[jay_NW]

keith2.2 said:

jay_NW said:

Hi everyone, I would like to share my supra build which started end of 2012 with you guys.

I wanted to build a nice clean street car that would also compete on the track and keep the look close to stock as possible.

Almost immediately followed by...

jay_NW said:

Bodywork wise a NUR Motorsports widebody kit was purchased

And great big contrasting bonnet vents.

Well, what's the point in having a base plan unless one is willing to bash through it :-D

Looks like a great project.

Thanks Keith, I know what you mean about the bonnet vents . Need that for cooling and all that

Only widened the rear end in order to run slightly wider wheels for grip.

[jay_NW]

Few pics of underneath of the car






TRD diff ready to go in



We are going old school with the fuel pumps.

Tripple walbros in a billet hanger, they will be staged with two running all the time and the third only when needed. Pumps will be controlled by the Syvecs and fuel pressure monitored as well.

I really like this setup as the hanger is a work of art and it keeps the fuel lines nice and simple.

[jay_NW]

Turning our attention to the inside of the car, Simon did a great job of fitting the roll cage in and making the rear bars removable.

Wants to keep the rear seats usable so the rear cross bars are quick release. Will get more pics of the cage up once the interior goes in.

For now we have stripped the cage back out so we can work on it.





Despite the big power we still want to make the car drivable so the inside will be full trim with audio system.

We start by sound proofing the whole interior which will also help with heat from the engine bar and trans tunnel.











The audio system :



INE-W925R
SPR-17S (Front Speakers)
SPR-17C (Rear Speakers)
PDX-F4 (Midrange Amp)
PDX-M6 (Sub Amp)
SWR-T10 (Sub)
SRD Custom Sub Box
Focal RCA cables

Couple of pics of the Turbo HKS T62R

[jay_NW]

SRD V Band Manifold, will be getting Zircotec coated along with the turbo exhaust housing and down pipe.







Got the bits back from Zircotec, superb finish as always







Fitting for the brake lines, all stainless steel







Not sure if this has been done on a supra before but we are using quick release fittings for the rear brakes. Will be swapping over to NA brakes to put drag wheels on and these fittings mean that you can disconnect the brake line with out loosing fluid or needing to bleed the brakes.

[jay_NW]

Rear brake lines made up with quick release fittings

[jay_NW]

Fuel tank fitted



Fuel lines and brake line running to the front





We have built a cover for the fuel and brake lines, this also houses a fuel cooler which is ducted.

The air can move through the cooler along the channel and out the hole at the back which will keep all the lines cool as well.





This will be painted white once finished

[jay_NW]

Mounting plates made for amplifiers



Amplifiers in position and wired

[jay_NW]

Getting to the exciting stuff now

SRD 3.4L Stroker kit ready to be cleaned and assembled.



Block prepped, cleaned and painted. Ready to receive the internals



Sump before refurb



Sump after refurb

[jay_NW]

Internals assemble and oil pump fitted



Sump and strainer fitted



One short block assembled



All threads retapped

[jay_NW]

SRD stage 5 head





Head installed with L19 head stud kit