RESULTS Bob Watson Dyn Day 6th October ....

[carreraboy]

Here are the results some interesting readings ....

Mark Freeman 964 Carrera 2 3.8 Motec 327 BHP Flywheel 275 BHP Back Wheels

John Liles Orange 964 Carrera 2 3.6 298 BHP Flywheel 248 BHP Back Wheels

Steve Henson Standard 996 Carrera Cup GT3 413 BHP Flywheel 350 BHP Back Wheels

Kevin Sheehan Standard 89 LE 930 3.3 Turbo 330 BHP Flywheel 277 Back Wheels

Andrew Gibson 997 Carrera 2 367 BHP Flywheel 297 BHP Back Wheels

Richard Salmons 968CS Standard 233 BHP Flywheel 186 BHP Back Wheels

Nick Ramsey 993 Turbo 384.5 BHP Flywheel 330 BHP Back Wheels

Stewart Rix 993 Turbo 375 BHP

Kirk Nunn 993 Standard C2 Targa Varioram 291 BHP Flywheel 243 BHP Backwheels

Alasdair Mackenzie 993 C4S 309 BHP Flywheel 256 BHP Back Wheels

Marcus Ogilvey 964 Carrera 2 249 BHP Flywheel 207 BHP Back Wheels

_________________________

TEAM LEICHTBAU RACING

DR. Gafa Team Manager

Perfect Line (Minty) through Eau Rouge below
http://uk.youtube.com/watch?v=dWxPamCQ9EM

ZWANZIG JAHRE T-SHIRTS only £10!
http://www.londonprintservice.com/porschepromo.htm...

Edited by carreraboy on Wednesday 10th October 11:47

Edited by carreraboy on Friday 12th October 09:55

Edited by carreraboy on Friday 12th October 09:56

[carreraboy]

nxi20 said:

I don't know how this was missed, but my car did run successfully & I have the printout to prove it!

Engine: 384.5 bhp
Wheel: 330 bhp
Torque: 551 Nm (406 lbs/ft)

Very very very very sorry .... must have misunderstood Bob

[carreraboy]

The Cup Car is totally standard, other than a regular exhaust for track day compliance with the original Cup exhaust taken off, so presumably would have mad more than 413BHP .... Impressed with the 993 Targa again standard ..... and the 930 Turbo, which was dyno'd 15 years ago and exactly same result!

Will be having another day at Bob's next year probably October again and would like to invite all Pistonheaders to Join the Modifeid Register at Bob's again, well supported chaps ...

[carreraboy]

http://www.youtube.com/watch?v=CatSiMUErI4

http://www.youtube.com/watch?v=a29jV0id8XE

http://www.youtube.com/watch?v=MkmevnOh-ww

http://www.youtube.com/watch?v=cjcvk-DH12U

Videos of the day above ....

[carreraboy]

stewart rix said:

That was mine that had the boost issue. Bob managed to get a reading of 375 engine bhp on less than WOT. He had tried a run twice on WOT and there was a big [turbo] pressure release each time, with boost fluctuating. The actuators are indeed from a GT2 (replaced by Bob a few months ago as he tried to track down a low boost issue), and the 'cycle valve' controller was also replaced before that. Now going to replace the cut off (dump/diverter) valves. Maybe next time I might get closer to the theoretical 430bhp

Sorry Stewart no added to list .... was a very busy day for me ..... thanks for coming.

[carreraboy]

That Turbo glowing red!

[carreraboy]

For those not familiar with Bob's Dyno, it is the same as Posrche Motorsport and used to calibrate several racs series, if you also look some of the cars were way down on power ..... It's the truest Dyno iI know off ....

[carreraboy]

Ask Bob .... obviously some here are not aware of his superb reputation and race (old) engine expertise, there are some dyno's that will give you more

[carreraboy]

He calibrates race cars for several Porsche race series, you had 993TT with expected 430BHP that made way less the last 964 was expecting over 300 which he had on a different Dyno and only made 247 BHP, a standard 968 made 233 BHP, yes there were some higher than expected readings, so a wide range of results ..... Anyway it was a fun day, well supported from Pistonheaders and club members ... doing it again next year, you are all invited.

[carreraboy]

Interesting ...

[carreraboy]

STiG911 said:

The glow from under the 930!!!

Something like this .....


http://www.youtube.com/watch?v=Sqsw362D0YI&fea...

[carreraboy]

THE END