Horn not working so MOT failed.Blowing exhaust- advisory!
Discussion
Just been for my MOT and the bl**dy horn isn't working so it has failed. I had a late MOT, 5pm so he couldn't get to the bottom of it then so I left it and walked home. He did ascertain that the relay works when the horn is pushed so I am assuming that it isn't the fuse, is that correct? Any ideas?
Are there two horns, one on each side of the radiator or just the one, we found one on the offside?
One other thing is that the exhaust is blowing...only an advisory. The tester thought it was from both the manifild gasket and the cat flange. Am I right in thinking that the speed six doesn't have manifold gaskets but use high temp rtv? Can I just unbolt the gaskets and use the rtv and fill the area round the flange to?
Are there two horns, one on each side of the radiator or just the one, we found one on the offside?
One other thing is that the exhaust is blowing...only an advisory. The tester thought it was from both the manifild gasket and the cat flange. Am I right in thinking that the speed six doesn't have manifold gaskets but use high temp rtv? Can I just unbolt the gaskets and use the rtv and fill the area round the flange to?
Edited by S6 Devil on Thursday 1st March 21:43
Gassing Station | Tuscan | Top of Page | What's New | My Stuff