Indicators work but not the hazards and an MOT is due

[mudflaps]

Hi, I wonder if anyone can help. I've a late 2003 mk1 and I've just discovered that although the indicators work the hazards don't.

Are they on separate fuses? If it's not a fuse what else could it be? I ask because I don't have a manual. I think the fuse box is under the steering column but haven't checked as I'm in work but it's MOT is booked for Saturday am.

Thank you.

MF

[mudflaps]

The Surveyor said:

They are on a separate 15A fuse which also does the alarm indicator so it may be worth having a rummage under the dash. Also check that the indicator relay is pushed fully home as these can get accidentally kicked within the footwell.

Fuse panel layout below:-



Good luck with it.

Thank you for the diagram - I'll certainly be checking that first - but with my luck

[mudflaps]

tvrmallorca said:

hey...normally its a loose connector on the back of the hazard switch... bit of a bugger to do as you have to lift out the front display to get to it...hope that helps

Damn. Any idea where I even start with that? Any known pitfalls? I've just rung my local TVR garage and they can't see me for a while.

[mudflaps]

It appears from the diagram that the fuse for the Hazards is the same fuse for the 'Alarm Indicators'. All of my indicators work when I alarm the car upon leaving it parked which kinda points to the connection at the switch I suppose?

I can't actually get to the car until later or I'd confirm before asking.

Sorry chaps.

[mudflaps]

Thanks for your time everyone.