LED bulbs for the dipped main beam
Discussion
I've had similar problems. Going from the Main beam to the dipped beam can almost seem like you've turned the lights off completely for a few seconds. Not good on a country road at 60mph. I also had issues with the fuses blowing when I flashed the main beams.
I was looking at these:
http://www.ebay.co.uk/itm/371443131629?_trksid=p20...
I was looking at these:
http://www.ebay.co.uk/itm/371443131629?_trksid=p20...
magpies said:
personally I'd avoid those - whenever the description
mentions 'Fog' you'll find that the output is not good enough for main or dip, also looking at the led spread they are not at the same focal point as the halogen/HiD so the beam pattern would be awful.
Thanks I feared that might be the case. These are the only other ones I can see that would do the job:mentions 'Fog' you'll find that the output is not good enough for main or dip, also looking at the led spread they are not at the same focal point as the halogen/HiD so the beam pattern would be awful.
http://www.ebay.co.uk/itm/252175451048?_trksid=p20...
Not quite sure if they are going to fit with the fan/heatsink so close to the waterproof light cover.
Gassing Station | Tuscan | Top of Page | What's New | My Stuff