Discussion
I'm using the correct cable, and i have tried all the combinations for the pin layout. I'm saying there was nothing coming out "data" from the black plug, because connected to the pc using the "terminal, there was nothing received by the pc" I'm an IT Engineer, so 100% that the laptop port is working tested with a different device" so the question for the immobilizer if it's not present, does the black plug works without the immobilizer?
The previous owner bypassed the immobilizer, i don't have it installed.
But the Ecu is power on i think, because have all the info available on the dashboard or is the blue Ecu just for extracting the info to the pc?
The terminal program was just to see if the Ecu was sending anything to the port, you would see strange characters on the terminal screen... so that's why I'm saying that the black plug is "dead" but as you say "because you have to send special codes to the ECU to get a response". The version that I'm using isNew Diagnostic Software (.zip | 954Kb)(yellow car background)) from: "http://www.thetvrsite.com/cerbera/ecu-diagnostic-software"
But the Ecu is power on i think, because have all the info available on the dashboard or is the blue Ecu just for extracting the info to the pc?
The terminal program was just to see if the Ecu was sending anything to the port, you would see strange characters on the terminal screen... so that's why I'm saying that the black plug is "dead" but as you say "because you have to send special codes to the ECU to get a response". The version that I'm using isNew Diagnostic Software (.zip | 954Kb)(yellow car background)) from: "http://www.thetvrsite.com/cerbera/ecu-diagnostic-software"
Gassing Station | Tuscan | Top of Page | What's New | My Stuff